Advanced Manufacturing Laboratory (AML)

The focus of the lab is on both process as well as system level manufacturing solutions. The current research activities include manufacturing process and system simulation, process planning, production planning, manufacturability analysis, and nanomaterial processing. Current facilities include injection molding, CNC machining, ceramic gel casting, in-mold assembly, layered manufacturing, power processing, high temperature sintering, and resin transfer molding.

RESEARCH FOCUS AREAS
Current focus areas of AML include the following:
 
  • Multi-Piece Molding: Multi-piece molds can be used to make complex-shaped parts that cannot be made by two-piece molds. Multi-piece molding technology overcomes the restrictions imposed by traditional molds by having many parting directions. These molds have more than one primary parting surface and consist of more than two mold pieces or subassemblies. Each of these mold pieces has a different parting direction. This freedom to remove the mold pieces from many different directions eliminates the undercuts produced by two-piece molds and enables us to make geometrically complex structures.
  • In-Mold Assembly for Creating Articulated Structures: We have shown that in-mold assembly can be used to create plastic products with articulated joints. In-mold assembly eliminates the need for post-molding assembly and reduces the number of parts being used in the product, hence improving the product quality. We have developed proven mold design templates for realizing revolute, prismatic, and spherical joints. We have also developed proven mold design templates for realizing joints found in compliant mechanisms.
  • In-Mold Assembly at the Mesoscale: In-mold assembly at the mesoscale is significantly different from the molding at the macroscale. The prefabricated part inside the mold experiences significant mechanical and thermal loading due to its small size. This makes the part vulnerable to significant damages. Due to this, a new molding approach is needed to perform in-mold assembly at the mesoscale. We demonstrated the technical feasibility of creating rigid body mesoscale joints using in-mold assembly process. To the best of our knowledge, this is the first demonstration of in-mold assembly process using a morphing cavity mold to create a mesoscale revolute joint.
  • Injection molding of fiber-filled polymers: Emerging filled polymer composite materials have improved mechanical, thermal, electrical properties compared to unfilled polymers. We have the capabilities to mold highly conductive fiber-filled polymers. This capability is being used to create polymer heat exchangers and heat sinks.
  • Hierarchically-Structured Multifunctional Polymer Composites: The integration of microscale and nanoscale fillers can enhance mechanical, electrical, and thermal properties from the interaction of the fillers across multiple length scales. We are currently characterizing how these properties transition across length scales and compositions in order to optimize the multifunctionality of these materials for applications such as electrically-conductive impact-resistant panels for marine structures and thermally-conductive adhesives for space structures such as in the figure below.
  • Folding Wing Ornithopter: Ornithopters are flying vehicles that use flapping wings to create lift and thrust. By creating an ornithopter that uses compliant wings, greater realism in flight can be achieved. When wings are folded during the upstroke of the flapping motion, their surface area is reduced, thus lowering negative lift production. By passively unfolding the wings during the downstroke, surface area is maximized, thus producing a positive lift gradient between the upstroke and downstroke. This additional lift production can be used to augment the aerodynamic lift that is produced by passing fast moving air over the wings, thus allowing very slow forward flight speeds while maintaining payload capacity and controllability of the ornithopter.
  • Functionally Graded Materials (FGMs): Optimal application of composite structures often requires that properties be distributed in a gradual manner rather than in abrupt transitions in order to mitigate stress concentrations and enhance transport processes. We have pioneered a variety of commercial processes for FGMs, such as nano-enhanced pressureless sintering of graded metal-ceramic processes and twin-screw extrusion of polymer composites that can be seen in the figure below. In situ and a posteriori techniques have also been developed to characterize the gradient architecture and associated property distributions. Modeling tools are available for designing FGMs using these processes in a variety of applications, ranging from armor panels to rocket motors. Our graded materials are also being used for combinatorial development of new polymer composites with multiple fillers.
  • Gelcasting of Bioinspired/Biomedical Structures: The manufacturing of bioinspired and biomedical structures require new technologies that enable the more complex geometries and material distributions found in natural systems to be transferred to synthetic structures. We have been able to utilize gelcasting technology for ceramics and metals combined with a pore-inducing technique based on carbon burnout to create geometrically complex bioinspired/biomedical structures, such as the replamineform inspired bone structure using multi-piece molding technology. These structures can be easily mass-produced with a variety of materials distribution consisting of metals and ceramics and in a variety of geometric configurations.

Hugh Bruck

Professor
301-405-8711 | bruck@umd.edu
Profile

Top